We leverage our relationships, knowledge and Principals to bring you the best Packaging Technology solutions in the world today.
We seek to deliver the best efficiency and effectiveness within every packaging application we work on whether it’s a single machine or a turn-key fully engineered solution involving multiple machines and/or capabilities.
Horizontal Wrapping Solutions
With state of the art technology and over 40 years of application experience we can bring the ultimate packaging and feeding solutions for any flow wrapping application.
We offer horizontal wrapping machines that can solve for speeds of 150 packages per minute up to 600 packages per minute in our standard mid-range wrappers (Pack 101/201/401) manufactured in the USA and over 1000 per minute in our high speed Swiss manufactured machines. We have special application wrappers (Pack 301/301IN/301LD) which accommodate applications where products are soft, stacked, on-edge or need to be controlled into and through the wrapper or require hermetically sealed packages. Complimentary to the wrapping machines we offer a wide range of Packaging wrapping feeders integrated to the wrappers to accommodate applications requiring handling of products including but not limited to:
- Gap closing and metering
- Pre-turning and turning
- Product stacking and collating
- Buffering or accumulation
- Inline stacking
- Cardstock feeding
Bosch Pack 101
Vertical Form Fill and Seal
Steeped in 50 years of experience spawned in the coffee industry we offer a wide range of single tube and twin tube intermittent and continuous motion vertical form fill seal machines that can accommodate speeds of 60-400 packages per minute.
Our intermittent (SVI series) and continuous motion (SVE & SVC series) deliver packages in a variety of bag formats including but not limited to:
- Side gusseted
- Block bottom
- Corner seal gusseted
- Doy stand up pouch with zipper re-closure
Our vertical form fill and seal machines can come equipped with net weight scale systems; auger fillers or other volumetric filling capability. Similarly check-weighing and/or metal detection can be incorporated into the solution if needed. We offer machine design and capability for pressure heat seal, heat seal or ultrasonic sealing as well as clean-ability designs for simple wipe down of dry products, mild cleaners for wet foods, or wash-down with unrestricted foam cleaning agents.
Bosch SVI 2400
Bag Closers and Sealers
We offer a wide selection of bag sealing equipment from BOSCH; the line has been trusted for over 60 years to dependably seal a wide range of bag types from paper to plastic to woven polypropylene. The line and its selection of machines is the largest available anywhere in the world. The machines available include the following:
- Band sealers
- Hot air sealers
- Glue sealers
- Pinch style sealers
- Rotary sealers
- Medical grade sealers
- Portable/Table top sealers
Case Erecting and Integrated Form, Pack and Seal
For semi automatic slower speed applications we have a variety of case erecting and packing solutions for all applications.
The BEL 505G3 is a versatile Semi-Automatic Case Former / Case Erector. It is the smallest of the 505 series, allowing for packing from all 3 sides as well as operation in areas with extremely limited space. It is the perfect pairing for a BEL 150 Semi-Automatic Case Sealer.
Wexxar – Bel
Gravity Metal Detectors and Metal Detection, Check Weighing, X-Ray Technology
Phantom Gravity metal detector systems are designed to detect metal contamination in dry, powdery or granular free-flowing products that can be gravity fed through a pipe.
- Core DSP: Digital Signal Processing (DSP) technology provides unparalleled precision, speed, and detection results
- UltraSense: Maintains high sensitivity levels to detect the smallest metal contaminants
- Auto Test ensures consistent performance and saves costs
- Automatic Calibration at the touch of a button
- Intuitive User Interface Provides dedicated shortcut keys
- Flash RAM Memory technology prevents information loss
- Robust Modular Design for fewer product parts results in greater reliability
After designing and building many different types of filler machines over a 20 year period and operating fillers in a contract packaging environment, INLINE have the wisdom and experience to offer you only those technologies which provide the highest quality of machine with versatility, flexibility and reliability for the best cost.
They also offer a wide range of capping, labeling, coding and complete line integration design services that can accommodate small to very large filling applications of various products.
MINIJET Washing System and Washing System - Cabinet or Tunnel Formats
This system is suitable for washing, rinsing and drying a wide variety of items to be cleaned. Whether containers, molds or parts of chocolate processing machinery; the minijet does a great job of it, runs efficiently, economically and distinguishes itself by its extremely user-friendly one-person operation.
- Special parts
We offer a variety of machine solutions for washing baking trays, molds, pails, bins and pallets that save money on water and maintain quality of the manufacturing environment.
MINIJET Washing System
Module++ Smart Automation
Due to the broad portfolio offered with BOSCH; we can be a single source for all your needs – from processing and packaging equipment, to handling and inspection technologies.
We offer trusted Solutions. Over a decade of experience in the provision of smart automation by BOSCH makes it highly likely a similar product solution has been addressed and can be utilized and optimized quickly to create the right solution cost effectively.
Whether you are looking for a standard single machine, a complex system or a customized solution, Bosch offers processing and packaging equipment tailored to your requirements. We can also assist you in integrating third-party equipment for highly specialized lines
Integration requirements are considered early in the project phase to ensure compatibility and the use of standard machines reduces engineering requirements. This results in shorter delivery times and considerable lower investment costs than completely customized solutions from others.
We offer complete planning and project management, and will support you from the design and engineering of a line through to installation and maintenance. Whatever your goals, we are eager to help you realize them.
Pallet Stretch Wrappers
We can offer stand alone pallet stretch-wrapping solutions or integrated solutions with palletizing. Also available are robot wrapping machines that will go to the pallet rather than bringing the pallet to a central location to wrap.
The Orion Sentry semi-automatic stretch wrapping machine is an entry level, turntable style wrapping machine that was designed for economical and efficient unitization of pallet loads with stretch film. The Sentry stretch wrapper can dramatically increase efficiency and lower film cost per load compared to manual (hand) stretch wrapping. All steel construction, heavy-duty components and reliable electronics assure trouble-free operation for many years. For additional information visit www.rvevans.com or call 800.252.5894 x 201.
A BOSCH Delta robot solution can be created to solve nearly any application with products weighing under two kilograms using vacuum or mechanical end effectors. There are over 1000 parallel axis Delta Robots in production today worldwide.
Delta robot solutions include gently picking products from an incoming flow and top loading/placing products into trays, cartons or cases; or the robot can be used as a feed placer in a very small effective and efficient footprint to feed product to any kind of flighted or pitched conveyor; wrapper or other machine in-feed.
The Paloma pick-and-place Delta Robot aligns and places products into cartons, cases or trays. The Paloma is available with 1, 2 or 3 arms and the Delta robot can pick products at speeds up to 290 products per minute with three arms. The machine footprint is very efficient at 3.7m by 1.6m (12 ft. x 5.2 ft.).
- 1.7m by 2m (5.6 ft. x 6.5 ft.) single stream product infeed
- 2.7m by 3.6m (9ft. x 12 ft.) dual stream product infeed
The Presto Robot solution is designed to take the output from two upstream wrapping machines. BOSCH carton forming and closing can be supplied for an integrated solution.
The Presto Feed Placer is highly efficient and adaptable to a wide range of robotic feed applications as well. The Delta Robot technology can place product into your wrapper, thermoformer or cartoner in-feed in either flat or on-edge orientation single or multiple products per flight.
The Delfi top loading robot is a vision-guided high-speed top loader Delta Robot. The Robot accepts aligned or randomly oriented incoming product flow on a wide belt conveyor (800mm or 1300mm) and places the product into cartons, boxes, cases, blisters or trays.
The product is a component solution and can handle up to 260 products per minute per two robot cell component in very small footprint of 2m by 2m (6.5ft by 6.5ft). Two robot cells are placed in series to solve for high through put applications.